3D Archery Target Repair Foam Kits
 
 
 
 
 
 
 
 
 
 
 
 
 
 

LINKS

 
 
We Accept These Credit Cards

PayPal Verified


Basic 3D Archery Target Repair Instructions

CHEMICAL: Always store and use foam chemical material at room temperature. Material works best when mixed and used at 70 plus degrees Fahrenheit.

TARGETS: Temperature + Moisture (excess humidity). Targets must be dry and at room temperature.

SAFETY: Keep out of reach of children. DO NOT eat, drink, or feed to anything! Use latex gloves, safety glasses and use only in well ventilated area. When burning in scoring rings, do so outside. Use a box fan to move fresh air across work surface.

CLEAN UP: After foam is cured, you can scrape up or peel spills off many surfaces (i.e. floor, tile, etc.). Acetone works well to remove from mixing device and or bench tops.

FOAM: The warmer the ambient temperature is, foam material, target, air temperature, etc., the higher the yield will be from the foam material.

RANGE PRECAUTIONS: Never shoot any 3D target repaired or new target with low poundage child bows, blunts, or any point not designed to penetrate the foam! Arrows will ricochet back towards the shooter and could cause SEVERE injury!

1. Make scoring ring template if desired, using plastic sheeting.
3D target repair foam instructions - scoring rings

2. Remove shot out material from target.
3D target repair foam instructions

3D target repair foam instructions


3. Apply forms using plastic sheet and staple gun.
3D target repair foam instructions

4. Mix target repair foam components A & B in mixing container using your FREE mixing tool, on a high speed electric drill (2500 RPM or more), then place mixer in acetone.
3D target repair foam instructions

5. Pour mixed foam material into target form. Allow to expand and set overnight.
3D target repair foam instructions

6. Remove the forms and staples, shape, replace scoring rings, paint and START SHOOTING!
3D target repair foam instructions

3D target repair foam instructions


3D target repair foam instructions

*NOTE: For more detailed 3D target repair instructions, tips, tricks and hints, click on Tip's, Trick's & Hint's or Detailed 3D Target Repair Instructions.